Shop headings: New Spares | Used Spares | Accessories | Brands
Pivot bolt and special nut for Brembo PS 13 and PS 16 master cylinders, also used for some hydraulic clutch lever pivot bolts
Not for early Cali 1100s fitted with solid brake lever pivot pins. Brembo ref. 110279850
This part is due back in stock soon, call 01484 841395 to reserve yours
10279850 GU10279850 10 27 98 50
1027 9850 1027.9850 10.27.98.50
£7.80
INC VAT
£6.50 EX VAT
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT
Titanium rocker feed and breather M8 banjo bolt
Made specially for Gutsibits in corrosion resistant grade 5 titanium. Use with SIA12200 crush washer
More than 5 in stock
95990037 GU95990037 95 99 00 37
9599 0037 9599.0037 95.99.00.37
£8.00
INC VAT
£6.67 EX VAT
Single 100cm length of pipe used for oil return and breather applications depending on model. Can be used as gearbox breather on Tonti 5 speed gearboxes
Use hose clip FUA00004
More than 5 in stock
823956080
£8.00
INC VAT
£6.67 EX VAT
Dellorto kit containing idle adjust screw, o ring, spring and washer
Fits all VHB, PHF, PHBH and PHM carbs
1 in stock
13936600 GU13936600 13 93 66 00
1393 6600 1393.6600 13.93.66.00
£8.00
INC VAT
£6.67 EX VAT
Special nut for retaining crankshaft timing sprocket. Also used as clutch centre nut on V11 Sport
See TOA18651 for special tool to remove and tighten this nut. Nut also known as Guzzi ref. 93601025. See ENA92525 for correct part for series 2 Cali 1100s
This part is due back in stock soon, call 01484 841395 to reserve yours
93601026 GU93601026 93 60 10 26
9360 1026 9360.1026 93.60.10.26
£8.00
INC VAT
£6.67 EX VAT
Small aluminium centrestand bush. This is the bush that the short M10 mount bolts bolt through
Two required per stand
This part is due back in stock soon, call 01484 841395 to reserve yours
14433500 GU14433500 14 43 35 00
1443 3500 1443.3500 14.43.35.00
£8.28
INC VAT
£6.90 EX VAT
Valve collet
8 required per engine
More than 5 in stock
12038100 GU12038100 12 03 81 00
1203 8100 1203.8100 12.03.81.00
£8.30
INC VAT
£6.92 EX VAT
Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers
Supplied with 4 crush washers. Also known as Guzzi ref. 95990033
2 in stock
95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28
Also fits Laverda Jota
£8.40
INC VAT
£7.00 EX VAT
Rubber cover for Domino clutch lever and choke cable
Clutch cable rubber
2 in stock
27663815 GU27663815 27 66 38 15
2766 3815 2766.3815 27.66.38.15
£8.40
INC VAT
£7.00 EX VAT